Power wall battery is fashioning similar devices that can store energy for use when the power grid goes down or grid prices rise. When paired with solar panels, their batteries can further reduce our dependence on fossil fuels, which still provide so much of grid's power. Usually home battery is 2KWh, 5KWh and 10KWh.
1.Make sure the mains wire and breakers in the building are in compliance with the standard of rated capacity of battery to avoid the hazards of electric shock or fire.
2.Switch off the mains switch in the building before installation.
3.Turn off all the connected devices before connecting to the battery.
4.Recommended wires:16mm2, 25mm2, NOTE : It is recommended to use suitable wire in above table or thicker for safety and efficiency. NOTE: Set the battery pack breaker in “OFF” position and then install the battery pack.
5.Positioning of installation hole: drill the bottom hole of M8 × 10 expansion bolt on the wall, and refer to the figure below for the positioning size of bottom hole.
6.Drive in the M8 expansion bolt.
7.Install the fixing bracket in the direction shown in the figure below.
8.To install the battery box, lift the battery box to make the fixing frame close to the box body, and slowly lower the box body to make the hanging pieces on the back of the box be stuck in the fixing bracket installation slot.
9.The installation of wall mounted battery box is completed, as shown in the figure below.
